The Homemade Taser

A commonly used camera for this.

Have you ever want to have your very own taser? Well now you can make one and cheep! Well how do you make one of these taser? It's easy all you need is a disposable camera and some creativity. Ok so you’re hooked now right? Good so let's get started. First let's pop open the case. I did this with a flat screw driver. You need to find all of the clips holding the case together a break them open. Then we need to find the flash assembly because this holds all the power. Ok so somewhere close to the false there should be a black oval thing with two wires coming out of it. This is the capacitor and this powers the flash. CAUTION DO NOT TOUCH THE WIRES COMEING OUT OF THE CAPACITOR AS SOON AS THESE WIRES CONNECT THEY WILL RELEASE ALL OF HERE ENERGY. Ok so it not reaping looking like a taser right now is it? Ok to make this more efficient and look more stylish there are many things you can do. But one of the most important is extending the wires. To do this just strip down some wire capable of holding up to 300 volt (just in case so it doesn’t melt when we use it). OK so now attach two stripped wires to each of the terminals but ma should be ready just charge it and shock something.ke sure they DO NOT TOUCH. OK so drill 2 hole in your case and push the wires through. Now make a hole to you can press the charge button and charge your taser. Now it should be able to shock things good luck.